Digital thermostat with probe for temperature control, suitable for managing heating or cooling devices through a controlled socket. Designed for applications such as greenhouses, growrooms and other environments where a set temperature needs to be maintained simply and immediately.
Key features
- Device type: Digital thermostat with probe
- Function: Control in heating or cooling mode
- Load management: usable with devices connected to a socket, within the maximum limit indicated by the manufacturer
- Adjustment: target temperature setting via buttons
- Display: temperature and operating status display
Overview
What it is for
It is used to maintain a set temperature by switching a connected device on and off (for example a heater or cooler), based on the probe reading. It can also be used in non-“grow” contexts, such as temperature control in terrariums or aquariums, as provided by the manufacturer.
Who it is for
- Growers who want to automate thermal control of an environment
- Setups that require both heating and cooling management
- Users who prefer a plug-in, ready-to-use solution
What makes it different
- Supports selectable heating/cooling mode
- Temperature setting with 1 °C / 1 °F steps
- Very wide setting range (as per manual)
How to use
Installation
- Connect the heating or cooling device to the thermostat socket.
- Connect the thermostat to the mains as indicated by the manufacturer.
- Place the probe at the most representative point for temperature measurement, avoiding drafts, direct radiation and heat/cold sources.
Adjustment
- Set the desired temperature using the dedicated buttons (1 °C / 1 °F steps).
- Select the operating mode (heating or cooling) according to the manual instructions.
- If necessary, select the unit of measurement (°C/°F) from the device menu.
Maintenance
- Before cleaning, unplug the device from the socket.
- Clean the housing with a dry or slightly damp cloth, without immersing the device in water.
- Periodically check the integrity of the cable, plug and probe.
Warnings
- Use only with the power supply indicated by the manufacturer.
- Do not use in environments where the device may get wet or fall into water.
- Do not exceed the maximum power allowed by the manufacturer for the connected load.
Technical specifications
- Power supply: 230 V – 50/60 Hz
- Maximum power of connected device: 3000 W
- Adjustment step: 1 °C / 1 °F
- Setting range: from -50 °C to +99 °C (or -58 °F to +210 °F)
FAQ & usage tips
Can I use it for heating and cooling?
Yes, the device allows selection of heating/cooling mode according to the manufacturer’s instructions.
Where should the probe be positioned?
At a representative point for ambient temperature, at mid-height and away from drafts, direct sunlight and heat/cold sources, as indicated in the manual.
What type of appliances can I connect?
Plug-in appliances (for example heaters or coolers), provided they are within the maximum power allowed by the manufacturer.