Fixing accessory for clamping ducting and aeration/extraction components with a compatible diameter. Ideal for orderly assemblies and for maintenance operations where a simple, controllable mechanical connection is required.
Key features
- Device type: metal hose clamp
- Compatible diameter: Ø 110–130 mm
- Manufacturer indicated on the sheet: VENTS
- Typical use: securing ducting/accessories on ventilation and extraction systems
Overview
What it is for
It allows the connection between ducting and a connector/inlet to be clamped and stabilized, helping keep the assembly orderly and secure.
Who it is for
- For installations with ducting and accessories in the 110–130 mm diameter range.
- For quick replacement of worn clamps during maintenance.
- For systems where it is useful to inspect and re-tighten the fixing over time.
What makes it different
- Dedicated diameter range Ø 110–130 mm.
- Manufacturer indicated on the sheet: VENTS.
- Part of the C series (Vents C Series model table).
How to use
Installation
- Check that the outer diameter of the component to be clamped falls within the specified range.
- Position the clamp at the ducting–connector joint.
- Tighten the closing mechanism until a stable fixing is achieved.
Adjustment
Adjust the tightening gradually. If necessary, perform a check after the first system start-up.
Maintenance
Periodically check the tightening and replace the clamp if it shows deformation or signs of wear.
Warnings
Use only with components compatible by diameter. Avoid excessive tightening on delicate materials.
Technical specifications
- Compatible diameter: 110–130 mm
- Material (product description): metal
- Manufacturer indicated: VENTS
Brand
VENTS.
FAQ & usage tips
Is it suitable for 125 mm ducting?
Check the actual outer diameter of the point to be clamped: this clamp covers the 110–130 mm range.
Can I use it with circular ventilation components?
The C series is presented for circular ventilation systems; always check compatibility of diameters and geometries.
Does it need maintenance?
A periodic tightening check is recommended, especially after maintenance or ducting repositioning.