Inline axial extractor fan for ducted ventilation in indoor environments. It can be used for air extraction or intake and supports air exchange in growbox/growroom setups and small technical rooms.
Key features
- Device type: Inline axial extractor fan
- Flange diameter: Ø100 mm
- Airflow (max): 107 m³/h
- Power consumption: 14 W – 220–240 V (50 Hz)
- Noise level: 36 dB(A) at 3 m
- Use: Air extraction or intake in growbox/growroom setups
Overview
What it is for
It helps renew the air in indoor setups: in extraction mode it helps remove warm, stale air, while in intake mode it supports the supply of fresher air. Consistent ventilation reduces stagnant areas and helps stabilize the microclimate.
Who it is for
- Systems with ducting compatible with Ø100 mm
- Growboxes and small environments where simple inline ventilation is useful
- Users who want to rely on values verifiable from the official datasheet
What makes it different
- Designed for continuous operation without routine maintenance requirements
- Complete specifications on the datasheet (airflow, power consumption, noise level)
- Inline installation on round ducting with mounting orientation according to airflow direction
How to use
Installation
- Check that the duct/hole diameter is compatible with Ø100 mm.
- Mount the inline extractor fan on the ducting, observing the airflow direction indicated by the manufacturer.
- Secure the fan body with suitable clamps or brackets, avoiding vibrations and restrictions.
- Connect the power supply in accordance with current electrical regulations and the technical documentation.
Tip: to maintain more consistent performance, limit tight bends and crushed sections in the ducting.
Adjustment
- Basic control is via on/off power supply.
- For automation, refer to compatible solutions and the manufacturer’s instructions.
Maintenance
- Periodically clean dust and debris from grilles and impeller.
- Check that the ventilation line is clear and securely fixed.
Warnings
- Do not obstruct the air inlet or outlet.
- Before cleaning/maintenance work, disconnect the power supply according to the manual instructions.
Technical specifications
- Type: Inline axial extractor fan
- Flange diameter: 100 mm
- Maximum airflow: 107 m³/h
- Power consumption: 14 W
- Power supply: 220–240 V – 50 Hz
- Current: 0,10 A
- Speed: 2400 min⁻¹
- Noise level: 36 dB(A) at 3 m
Brand
VENTS manufactures ventilation solutions for ducted systems, with technical documentation useful for sizing. In indoor growing, using components with verifiable specifications helps design air exchange more consciously.
FAQ & usage tips
Why is Ø100 mm specified here?
The specifications were compiled using the supplier_code EU100 and the related official documents (datasheet/manual) associated with the variant.
Can I use it for active air intake?
Yes: the mounting and airflow direction determine whether it is used for extraction or intake.
What can reduce the actual airflow in the system?
Tight bends, long ducting runs, restrictions and accessories can increase losses and reduce effective airflow compared with the maximum rated value.